JT-500DFMulti-Function Chamfering Machine
Enlarge
| MODEL | JT-500DF |
|---|---|
| Accessory | Face milling cutter Ø50mm x Ø17mm x 35mm |
| Cutter Size | Sekn 1203 x 5pcs |
| Accessory | Wheel Ø100mm x 50mm x Ø17mm |
| Bowl Wheel | WA 60, K5, VA6 |
| Machine Size | L500mm x W420mm x H350mm |
| Voltage | 3Ø,220v-440v,1Ø 110v/220v;50Hz/60Hz |
| Speed | 3500r.p.m |
| Height of bevel | 0~3mm |
| Bevel angle | 45° |
| N.W./G.W. | 32kgs/36kgs |
| Packing | 55cm x 44cm x 38cm |
| Measurement | 3.4 Square feet |
| Motor | 1HP |
| Track Size | 500mm x 100mm x12mm, 500mm x 40mm x 12mm |
- Adopt with bowl type wheel and face mill cutting. Both are exchangeable.
The V type table is easy for chamfering and saving energy. - In the face mill cutting function. You can adjust the swivel angle to make the insert cutter to be valued using and saving the consumption costs of tools.
- Available for chamfering any kind of materials.
- Workpeice with angle 45 degree after chamfered.
- Special design of dust removed.
- CE version is available.
- PATENT model.
| ITEM / MODEL | 500BR (Original) | 500DF (New model) |
|---|---|---|
| Cutting Tools | Face mill only = Single function | Face mill + Wheel = Dual functions  |
| Differents for table | Fixed type | V type + L type (exchangeable), Saving the cutter costs. |
| Special design | No | Dust prevent / Dust removed design / Safety guard of tools |
| Assistant tools for cutting volume adjustment. |
Opening wrench + Hexagon wrench | Easy adjusting without any tools. |
| Costs for purchase | Simple model / Lower costs |
Advance model / Higher costs |
| Consuming cost of tools ( For long-term) |
High Costs | Saving half costs |
FACE MILL CUTTER +
5PCS BLADE
GRINDING WHEEL
