HL-40A
Hand Carry Engraving Chamfering Machine
 |
| MODEL | HL-40A |
|---|---|
| Voltage | 1PH, AC 110V ~ 240V ; 50HZ / 60 HZ |
| Speed | 500 ~ 22000r.p.m. |
| Horsepower | 1/3HP, 250W, 0.8A |
| Table size | Ø47 x Ø17 |
| Capacity (Steel Iron) | 0 ~ 2 C (within 1C per time) |
| Capacity (Aluminum) | 0 ~ 2 C |
| Flexional Shaft | 36" (91.44 mm) |
| Key type drill chuck-JT0 | 0~4 mm |
| Weight | 2.7 KGS / 3.3 KGS |
| Packing | 34 x 27 x 14 CM |
| Accessory | Alumium Solid Carbide Carbide Size: Ø15X 45 degree x 12 flutes Cutter Size : CPMT 060204 |
| Optional | Grinding Handle + Chuck (JT0) |
Features
- Light and portable type. Variable speed for different materials chamfering.
- With carbon brush, lower horsepower and high speed motor.
It's high speed chamfering, special for soft materials chamfering. - Replaceable engraving handle for both engraving and grinding.
- The horsepower is small, it's better to chamfered with stably and slowly speed.
- To do the iron steel cutting, the thiknees can not over 1mm for one time processing.