HL-300A
Inverter Chamfering Machine (Regular + Irregular )
| MODEL | HL-300A |
|---|---|
| Machine Size | L330 x W330 x H 300 mm |
| Voltage | 1Ø, 220V ; 50HZ/60HZ |
| Speed | 0~12000 r.p.m. |
| Horsepower | 1 HP |
| Height of bevel | 0~3 mm |
| Bevel angle | 45 degree |
| Track Size | 300 X 250 X 12 MM |
| Weight | 32 KGS / 36 KGS |
| Packing | 55 X 44 X 38 CM |
| Measurement | 3.4 Square feet |
| Accessory | CARBIDE END MILLS |
| Optional | Disposable carbide end mills (Steel processing use) |
Features
- Adopt with standard carbide end mill cutting.
- Equipped with inverter motor, range of speed 0~12000 r.p.m.
Depending on different materials do different chamfering process. (Except heat treatment) - Special for chamfering regular and irregular curving surface, such as inner gap, complex curve surface of inner or outer.
- Available for chamfering workpeice with inner diameter and inner gap width with 8mm or radian with 4R or above.
- Chamfer ability range: within 0~2C or 3R.
- Workpeice with angle 45 degree after chamfered.
- Optional disposable carbide end mills, save the costs for tool replacement.
- CE version is available.